代表性论文： 1. Guo K, Xu Y, Li J, Thrust force allocation method for shield tunneling machines under complex load conditions, Automation in Construction, 2018(96): 141-147 (JCR Q1, SCI, IF=4.032) 2. Guo K, Xu Y, Li J, A switched controller design for supply pressure tracking of variable displacement axial piston pumps, IEEE Access, 2018(6): 3932-3942 (JCR Q1, SCI, IF=3.557) 3. Zhu Z, Guo K, Sun J, Li J, Liu Y, Zheng Y & Chen L, Evaluation of novel tool geometries in dry drilling aluminum 2024-T351/titanium Ti6Al4V stack, Journal of Materials Processing Technology, 2018(259): 270-281通讯作者 (JCR Q1, SCI, IF=3.647) 4. Zhu Z, Guo K, Sun J, Li J, Liu Y, Chen L, Zheng Y, Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys, Journal of Manufacturing Processes, 2018(34): 531-539 通讯作者 (JCR Q1, SCI, IF=2.809) 5. Guo K, Yang B, Sun J, Sivalingam V, Investigation on the wear model and equivalent tool life in end milling titanium alloy Ti6Al4V, Proceedings of the ASME International Manufacturing Science and Engineering Conference, 2018 (EI) 6. Guo K, Xu Y, Yu H, Li J, Force controller design for a novel energy efficient electro-hydraulic actuation system, Proceedings of the IEEE International Conference on Advanced Robotics and Mechatronics, 2018 通讯作者(EI) 7. Xu Y, Guo K, Li J, Wang K, The torque on the swashplate of axial piston variable displacement pumps with conical cylinder blocks, Proceedings of the ASME Symposium on Fluid Power and Motion Control, 2018通讯作者 (EI) 8. Tian Q, Wei J, Guo K, et al. MIMO control of the cutting system for trench cutter based on disturbance observer. Control Conference. IEEE, 2015:99-104. 9. Li S, Wei J, Guo K, et al. Nonlinear Robust Prediction Control of Hybrid Active-Passive Heave Compensator with Extended Disturbance Observer. IEEE Transactions on Industrial Electronics, 2017, PP(99):1-1.（JCR Q1,SCI,IF=7.05） 10. Wang H, Sun J, Zhang D, Guo K, Li JF. The effect of cutting temperature in milling of carbon fiber reinforced polymer composites. Composites Part A Applied Science & Manufacturing, 2016, 91:380-387. 11. Guo K, Wei J, Fang J, et al. Position tracking control of electro-hydraulic single-rod actuator based on an extended disturbance observer. Mechatronics, 2015, 27:47-56.（JCR Q2,SCI,IF=2.423） 12. Wei J, Guo K, Fang J. Nonlinear supply pressure control for a variable displacement axial piston pump. Proc. IMechE, Part I: J. Systems and Control Engineering.（JCR Q4,SCI,IF=0.988） 13. Guo K, Wei J, Tian Q. Nonlinear adaptive position tracking of an electro-hydraulic actuator. Proc. IMechE, Part C: J. Mechanical Engineering Science.（JCR Q4,SCI,IF=0.996） 14. Guo K, Wei J, Tian Q. Disturbance observer based position tracking of electro-hydraulic actuator. Journal of Central South University of Technology.（JCR Q3,SCI,0.761） 15. Guo K, Wei J. Adaptive robust control of variable displacement pumps[J]. 2013 American control conference. p.1112-1117.（EI） 16. 魏建华, 国凯, 熊义. 大型装备多轴电液执行器同步控制. 浙江大学学报（工学版），2013, 5:755-760. （EI） 17. 倪佳, 国凯, 丁小川. 液压提升式升船机主提升系统同步控制建模与仿真研究. 液压与气动.（核心） 专利： 18. CN201510863162 孙杰, 路来骁, 国凯, 简祖宝. 一种用于薄壁结构的双侧滚压装置. 19. CN201610602257 国凯, 朱兆聚, 孙杰, 刘凯. 基于Logistic曲线具有S型刀刃的断屑钻头. 20. CN201610224684 孙杰, 侯秋林, 李楠, 姜振喜, 国凯. 基于CCD的刀具参数测量装置及其测量方法. 21. CN201310171205 魏建华, 国凯, 张成龙等. 一种轴向柱塞泵回程机构. 22. CN201410008102 魏建华, 李世振, 国凯等. 一种基于速度差动压反馈液控伺服阀. 23. CN201310233753 方锦辉, 胡世松, 杨帆, 熊熙程, 国凯, 胡波等. 基于液压试验台的被试阀的负载压力的控制方法. |
