[1]      Lu  Dong,  Li  Jianfeng, Rong  Yiming, Sun  Jie. 3D milling process simulation of aero-aluminum alloy 7075-T7451[J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering,2008, v 19, 22: 2708-2710. (EI收录)

[2]      Zhou Jun, Li Jianfeng, Sun Jie, Xu Zhiping. The influence of tool edge radius on size effect in orthogonal micro-cutting process of 7050-T7451 aluminum alloy[J]. Key Engineering Materials,2008, 375-376: 31-35. (EI收录)

[3]      Lu Dong, Li Jianfeng, Rong Yiming, Sun Jie, Zhang Song, Zhou Jun, Jiang Feng. Deformation analysis of aero thin-walled workpiece under multi-stress coupled effect[C]. ASME International Mechanical Engineering Congress and Exposition,2008,3:425-429. (EI收录)

[4]      陈建岭,  李剑峰, 孙杰, 王中秋, 徐志平. The Influence of Material Constitutive Constants on Numerical Simulation of Orthogonal Cutting of Titanium Alloy Ti6Al4V[J]. Key engineering material, 2008,375-376:182-186.(EI收录)

[5]      J. Sun, Y.B. Guo. A new multi-view approach to characterize 3D chip morphology and properties in end milling titanium Ti–6Al–4V[J]. International Journal of Machine Tools and Manufacture, 2008, 48(12-13):1486-1494. (SCI)

[6]      Jian ling Chen, Jian Feng Li, Jie Sun, Zhong Qiu Wang, Zhi Ping Xu. The Influence of Material Constitutive Constants on Numerical Simulation of Orthogonal Cutting of Titanium Alloy Ti6Al4V.[J]// Key Engineering Materials, 2008, (75-376):182-186.（收录）

[7]      Jian Feng Li, Jie Sun, Fuzzy Optimization of Cutting Parameters for Titanium Alloy’s Machining. [C]//WICOM2008, IEEE, China, dalian, 2008:1-4.

[8]      路冬, 李剑峰, 孙杰, 姜峰. 框类零件加工动态夹紧力确定有限元分析[J]. 山东大学学报, 2007, 37 (1):19-22.

[9]      路冬, 李剑峰, 融亦鸣,孙杰. 铝合金7075-T7451三维铣削过程有限元仿真[J]. 中国机械工程,2008,22(19):2708-2710.（EI收录）

[10]   孙杰, 李剑锋, 杨勇. 整体结构件高效高精度加工关键技术研究(上)[J], 金属加工2008,16:26-28.（EI收录）

[11]   孙杰, 李剑锋, 杨勇. 整体结构件高效高精度加工关键技术研究(下)[J], 金属加工2008,17:18-20.