[1] Jiang Feng,  Li Jianfeng, Yan Lan, Sun Jie, Zhang Song. Optimizing end-milling parameters for surface roughness under different cooling/lubrication conditions[J]. International Journal of Advanced Manufacturing Technology, 2010,51(9-12):841-851. (EI收录)

[2] Jiang Feng, Li Jianfeng, Sun Jie, Zhang Song, Wang Zhongqiu; Yan, LanAl7050-T7451 turning simulation based onthe modified power-law material model[J]. International Journal of Advanced Manufacturing Technology, 2010,48(9-12):871-880. (EI收录)

[3] Li Guiyu Li, Jianfeng, Sun Jie, Li Weidong, Song Liangyu. A Finite element model to simulate the cutting of carbon fiber reinforced composite materials [J]. Advanced Materials Research, 2010, 97-101:1745-1748. (EI收录)

[4] Jiang FengLi, Jianfeng, Sun Jie, Zhang Song, Yan Lan. Optimization of cutting parameters for surface roughness in cold-air milling Ti6Al4V [J]. Key Engineering Materials, 2010, 431-432:233-236. (EI收录)

[5] Yang Yong, Li Jianfeng, Sun Jie. Correlation between single factor material constitutive model parameters and temperature for Ti6Al4V alloy[J]. Chinese Journal of Mechanical Engineering (English Edition, 2010, 23(5):574-581. (EI收录)

[6] Jiang Feng, Li Jianfeng, Sun Jie, Zhang Song, Yan Lan. Estimation of heat transfer coefficients in dry and cold-air cutting[J]. Advanced Materials Research, 2010, 126-128:341-346. (EI收录)

[7] Jiang Feng, Li Jianfeng, Sun Jie, Zhang Song, Wang Zhongqiu, Yan Lan. Erratum: Al7050-T7451 turning simulation based on the modified power-law material model(The International Journal of Advanced ManufacturingTechnology (DOI 10.1007/s00170-009-2328-9)) [J]. International Journal of Advanced Manufacturing Technology, 2010, 48(9-12):881. (EI收录)

[8] Jiang Feng, Li Jianfeng, Sun Jie, Zhang Song, He Yong. Research on tool-chip friction during Ti6Al4V milling process with different cooling/lubrication methods[J]. Advanced Materials Research, 2010, 97-101:1985-1989. (EI收录)

[9] Huang Pan-Ling, Li Jianfeng, Sun Jie,Song Liang-Yu. Vibration analysis in high speed machining titanium alloy with solid cemented carbide end mill[J]. Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2010,15(6):574-579. (EI收录)

[10] Sun Yu-Jing, Sun Jie, Li Jianfeng, He Yong. Influence of machining parameter on surface roughness and dimensional error of Ti6Al4V thin-walled component[J]. Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2010, 15(6):586-592. (EI收录)

[11] Song Ge, Li Jianfeng, Sun Jie, Zhang Wenguang. Influence of radial depth of grinding and finishing process on surface residual stresses in grinding AF1410 ultrahigh strength steel[J]. Advanced Materials Research, 2010, 97-101:2040-2043. (EI收录)

[12] Liu Yuping, Li Jianfeng, Sun Jie, Jiang Feng. Study on the influence of different tool edge radius on milling Ti6al4v[C]. ASME 2010 International Manufacturing Science and Engineering Conference,2010, 2:71-76. (EI收录)

[13] Li Gui-Yu, Li Jianfeng, Sun Jie,Li Wei-Dong. Process of drilling carbon fiber reinforced composite with cemented carbide drill[J]. Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2010, 15(6):580-585. (EI收录)

[14] He Yong, Sun Jie, Li Jianfeng. Analysis on serrated chip characteristic of Ti-6Al-4V by quick-stop test and finite element simulating model[J]. Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2010, 15(6):560-566. (EI收录)

[15] Jie Sun, JianFeng Li, ZhongQiu Wang. A Straightening method investigation based on rolling caused stress redistribution for distorted monolithic components[C]//Proceedings of the ASME International Manufacturing Science and Engineering Conference , Erie, Pennsylvania, USA, 2010:1-6.（EI收录）

[16] Zhongqiu Wang, Jianfeng Li, Jie Sun, Feng Jiang, Jun Zhou. Flow Stress Determination of Aluminum Alloy 7050-T7451 Using Inverse Analysis method[J]. Key Engineering Materials, 2010, 431-432:174-177(EI收录).

[17] 苑荣华, 孙杰，李剑峰.Experimental study on surface integrity by end milling 69111-stainless steel[C]. International Conference on Manufacturing Science and Engineering (ICMSE2009), 2010, 7-101:1257-1260.(EI收录).

[18] RongHua Yuan, JieSun, JianFeng Li, Liang Yu Song, Yong Wu Zhang. Experimental Study on Surface Roughness and Residual Stress by End Milling 69111-Stainless Steel[J].Advanced Materials Research, 2010, (97-101):1257-1260.（EI收录）

[19] Huang Panling, Li Jianfeng, Sun Jie. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills[J].Key Engineering Materials, 2010, (443):285-290.（EI收录）

[20] Huang Panling, Li Jianfeng, Sun Jie. Structure Optimization of Variable Pitch Helix End Mills Based on FEM Simulation[J]. Key EngineeringMaterials.2010, (443):291-296.（EI收录）

[21] Song Ge, Li Jianfeng, Sun Jie, Zhang Wenguang. Influence of radial depth of grinding and finishing process on surfaceresidual stresses in grinding AF1410 ultrahigh strength steel[J].Advanced Materials Research, 2010, (97-101): 2040-2043.（EI收录）

[22] Song Ge, Li Jianfeng, Sun Jie, Jiang Feng, Mu Tao, Yuan Ronghua. The Influence of Milling Parameters on Surface Residual Stresses during Milling AF1410 Ultrahigh Strength Steel[J]. Key Engineering Materials, 2010, (431-432): 209-212.（EI收录）

[23] Yang Yong, Li Changhe, Sun Jie. Three-dimensional numerical simulation of cutting force during milling of titanium alloy Ti6Al4V[J]. Yingyong Jichu yu Gongcheng Kexue Xuebao/Journal of Basic Science and Engineering, 2010,18(3):493-502. (EI收录)

[24] 周军, 李剑峰, 孙杰. 铝合金7050-T7451直角切削表面的残余应力研究[J]. 工具技术,2010,2:5,12-16.

[25] 牟涛, 李剑峰, 孙杰, 何勇, 宋良煜. 高速铣削Ti6Al4V 刀具磨损的试验研究[J]. 武汉理工大学学报, 2010, 32:43-44.

[26] 陈建岭, 李剑峰, 孙杰, 王中秋.钛合金铣削加工表面残余应力研究[J]. 机械强度,2010,32(1):53-57.

[27] 王中秋, 李剑峰, 孙杰, 姜峰. 轴承淬硬钢硬车微进给有限元仿真分析[J].武汉理工大学学报, 2010,2(32):63-67.

[28] 何勇, 孙杰, 李剑峰. 快速落刀试验及有限元仿真分析Ti-6Al-4V合金锯齿状切屑特性[J]. 粉末冶金材料科学与工程, 2010, 15(6): 560-566. （EI收录）

[29] 孙玉晶, 孙杰, 李剑峰, 何勇. 铣削参数对钛合金薄壁件表面粗糙度和让刀量的影响[J]. 粉末冶金材料科学与工程, 2010, 15(6): 586-592.（EI收录）

[30] 宋戈, 李剑峰, 孙杰, 张文光. AF1410超高强度钢硬质合金加工刀具的磨损机理[J]. 粉末冶金材料科学与工程,2010, 15(6): 567-573. （EI收录）

[31] 何勇, 孙杰, 李剑峰. 快速落刀试验及有限元仿真分析Ti-6Al-4V合金锯齿状切屑特性[J]. 粉末冶金材料科学与工程, 2010, 15(6): 560-566. （EI收录）

[32] 杨勇, 李长河, 孙杰. 钛合金Ti6Al4V铣削加工中切削力的三维数值模拟[J]. 应用基础与工程科学学报, 2010, 18(3): 493-502. （EI收录）

[33] 周军, 李剑峰,孙杰. 微切削加工A17050-T7451过程切屑形貌及尺度效应研究[J]. 山东大学学报:工学版, 2010, 40(3):148-153.