[1]      Chao Sun, Jie Sun, Jianfeng Li. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V thin-walled components[C]. Advanced Materials Research, 2012, 566:222-226. (EI收录)

[2]      Fulai Sun, Jie Sun, Jianfeng Li, Liangyu Song, Yuguo Luo. Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation analysis[C]. Advanced Materials Research, 2012, 566:476-479. (EI收录)

[3]      Fuzeng Wang, Jie Sun, Peiqin Sun, Jun Zhou. Finite Element Model and Analysis for Micro-cutting of Aluminum alloy 7050-T7451[C]. Advanced Materials Research, 2012, 566:650-653. (EI收录)

[4]      Wang Fuzeng, Sun Jie, Zhou Jun, Li Jianfeng. Experiments and finite element simulations on micro-milling of aluminium alloy7050-T7451[C]. Advanced Materials Research, 2012,500：556-562. (EI收录)

[5]      Rukun Tian, Jie Sun, Yujing Sun. Influence of Different Tool Corner Radius on MillingTi-6Al-4V[C]. Proceedings of the 7th International Conference on MicroManufacturing, 2012:432-436. (EI收录)

[6]      Huang Panling, Li Jianfeng; Sun Jie, Zhou Jun. Vibration analysis in milling titanium alloy based on signal processing of cutting force[C]. Proceedings of the 7th International Conference on MicroManufacturing, 2012:1-9. (EI收录)

[7]      G.C.Li, J.Sun, Y.He. Study on establishment of helix flute mathematic model of solid carbide end mills[C]//2nd International Conference on Frontiers of Manufacturing and Design Science,2012, (121-126): 4753-4757.（EI收录）

[8]      Huang Panling, Li Jianfeng, Sun Jie, Ge Maojie. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill[J]. International Journal of Advanced Manufacturing Technology, 2012, (58): 153-160.（EI收录）

[9]      王中秋, 周珊, 李剑峰, 孙杰. 轴承淬硬钢硬车残余应力有限元仿真分析及实验验证[J].山东大学学报, 2012, 42(1):109-120.

[10]   王虹入, 王中秋, 张倩李, 剑峰, 孙杰. 切削法构建铝合金A17050-T7451材料流动应力本构模型[J]. 山东大学学报, 2012, 42(1).

[11] Guangcun Wang, Jianfeng Li, Jie Sun, Fangyi Li. Study on fluent design forend mill based on oblique cutting model[C]. Applied Mechanical and Materials,2012 (121-126): 4758-4763. (EI: 20114714534082 ).