国超

[1] Guochao Li, Jie Sun, Jianfeng Li, Qingchun Xiong. Study on helical groove and    circumferential cutting edge machining simulation of end mill. Key Engineering Materials. 2014, 589-590: 351-356. (EI)

[2] 李国超,孙杰,李剑峰,整体式立铣刀三维精确建模与软件实现.计算机辅助设计与图形学学报.2014, 26(3): 411-417. (EI)

[3] Guochao Li, Jie Sun, Jianfeng Li. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology. 2014,75(5-8): 667-675. (SCI,IF: 1.779)

[4] Guochao Li, Jie Sun, Jianfeng Li. Process modeling of end mill groove machining based on Boolean method. Journal of Advanced Manufacturing Technology. 2014,75(5-8): 959-966. (SCI,IF: 1.779)

[5] Guochao Li, Jie Sun, Jianfeng Li. Modeling and analysis of helical groove grinding in end mill machining. Journal of Materials Processing Technology. 2014,214: 3067-3076. (SCI, IF: 2.041)

赵彦华

[6] Yanhua Zhao, Jie Sun, Jianfeng Li. Study on chip morphology and milling characteristics of laser cladding layer [J]. International Journal of Advanced Manufacturing Technology (2014), Vol. 77: 783-796. (SCI, IF=1.779，对应3.2节)

[7] Yingzi Wang, Yanhua Zhao, Jie Sun. Microstructure Characteristics and Surface Residual Stress of Iron-Based Alloy Coating by Laser Cladding[C].Applied Mechanics and Materials (2014), Vol. 696: 70-75. (EI，在线出版)

[8] yanhua Zhao, Jie Sun, Jianfeng Li. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling [J]. Applied Surface Science (2014), Vol. 321:387-395. (SCI, IF=2.538，对应4.3节)

[9] Yanhua Zhao, Jie Sun, Jianfeng Li. Study on Crack Sensitivity and Tribological Characterization of Functionally Gradient Material Multi-layer by Laser Cladding with Powder Mixture of Ni-based Alloy and Tungsten Carbide [J]. International Journal of Surface Science and Engineering (2014).    (SCI, IF=0.448, Article in Press)

汪海晋

[10] H. Wang, J. Sun, J. Li, W. Li, Investigation on delamination morphology during drilling composite laminates, International Journal of Advanced Manufacturing Technology, 74 (2014) 257-266.  (SCI, IF=1.779) （已收录）

周长安

[11] 周长安, 孙杰, 李卫东, 等. 铝合金 7050-T7451 毛坯初始残余应力测试[J]. 机械科学与技术, 2014, 8: 029.

封慧

[12] 封慧, 李剑峰, 孙杰. 曲轴轴颈损伤表面的激光熔覆再制造修复[J]. 中国激光, 2014 (8): 80-85.

贾兴民

[13] 贾兴民, 李剑峰, 孙杰. 钛合金TC4切削力试验研究[J]. 机械设计与制造, 2014(10) : 139-142.（核心）

[14] 贾兴民, 李剑峰, 孙杰，等. 基于切削力与振动特性钛合金铣削工艺参数研究[J]. 机械设计与制造, 2014(12) : 204-208.（核心）

于鑫

[15] 于鑫, 李世涛, 孙杰. EA4T车轴车削表面完整性研究[J]. 工具技术, 2014, 48(9) : 77-80. （核心）

[16] 于鑫, 孙杰, 李世涛, 李剑峰. 滚压工艺对EA4T车轴表面质量完整性的影响及预测模型建立[J]. 中国表面工程, 2014, 27(5) : 87-95. （EI收录）

李世涛

[17] 李世涛, 于鑫, 孙杰, 张世欣, 张占岭. EA4T车轴车削工艺参数与表面粗糙度关系研究[J]. 制造技术与机床, 2014, (8) : 113-117. （核心）

[18] 李世涛, 于鑫, 孙杰. EA4T车轴车削工艺参数与表面残余应力的关系[J]. 机械设计与研究, 2014, 30(6) : 90-94. （核心）

赵艳哲

[19] Yanzhe Zhao, Jie Sun, Keyu Wan, ''Experiment and FEM simulation analysis on cooling characteristics of the pork tissue with skin in liquid nitrogen cryotherapy'', Applied Mechanics and Materials, Vols. 675-677 : 1664-1669(2014).（EI收录）

[20] 赵艳哲, 孙杰, 王克玉, “低温冷冻皮肤组织仿真实验结果分析”, 中国医学物理学杂志, Vol.31 No.1 : 4699-4703(2014).（核心）

孙玉晶

[21] Yuiing Sun. Jie Sun, Jianfeng Li, Qingchun Xiong. An experimental investigation of influence of cutting parameters on cutting temperature in milling Ti6A14V by application of semi-artificial thermocouple [J].International Journal of Advanced Manufacturing Technology, 2014,70(5-8): 765-773 (SCI/EI, IF=1.205)

[22] Yuiing Sun. Jie Sun, Jianfeng Li. Modelling and experimental study of temperature distributions in end milling Ti6A14V with solid carbide tool [J]. Proceedings of the Institution of Mechanical Engineers，Part B: Journal of Engineering Manufacture. 2014. (SCI, IF: 0.770. Accepted)

[23] Yujins Swu Jie Sun, Jianfeng Li, Qingchun Xiong. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbide tool in high-speed milling Ti6A14V [J]. International Journal of Precision Engineering and Manufacturing. 2014. (SCI, IF: 1.585. Under Review)

黄晓明

[24] 黄晓明, 孙杰. 基于高速铣削正交试验7050-T7451铝合金表面粗糙度的研究. 中国工程机械学报,2014,12(3):248-251 （中文核心录入）

[25] Huang Xiaoming, Xiong Qingchun, Jie Sun. Effects of milling process sequence on the monolithic components deformation [C]. The 11th Asia-Pacific Conference on Materials Processing. 2014.08（EI录入）