朱兆聚

[1]Zhaoju Zhu, Kai Liu, Jie Sun, et al. Investigation on performance Characteristics and metallographic transformation on drilling aluminium/titanium sandwich[J]. Journal of Sandwich Structures and Materials 0(00) 1–17 (2017) . DOI: 10.1177/1099636217724601 (SCI，IF=2.933) (online) 

[2]Zhu Z, Sui S, Sun J, et al. Investigation on Drilling Performance of Titanium Alloy Ti6Al4V Based on Response Surface Method[C]//ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017: V003T04A011-V003T04A011.DOI:10.1115/MSEC2017-2926 (SCI) (Published)收录号: WOS:000412248900011

[3]Zhu Z, Sui S, Sun J, et al. Investigation on performance characteristics in drilling of Ti6Al4V alloy[J]. The International Journal of Advanced Manufacturing Technology, 2017, 93(1-4): 651-660. DOI: 10.1007/s00170-017-0508-6 (SCI) (Published) 收录号: WOS:000412903700057

路来骁

[1] Lu L X, Sun J, Li Y L, et al. A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts[J]. The International Journal of Advanced Manufacturing Technology. 2017, 92(9-12): 4121-4131. DOI: 10.1007/s00170-017-0420-0  (SCI) (Published)收录号:WOS:000411237500082

[2] Lu L X, Sun J, Guo K, et al. Study on the Generation and Redistribution Mechanism of Residual Stress in Bilateral Rolling Correction Process for Thin-Walled Parts[C]. Los Angeles, California, USA: 2017. DOI:10.1115/MSEC2017-2741 (SCI) (Published)收录号: WOS:000412246300027

[3] 路来骁，孙杰，韩雄，等. 基于能量理论的整体结构件滚压变形校正载荷预测方法[J]. 学报. 2017, 38(11): 421326. (已在线出版，11月15号出版)

黄晓明

[1]黄晓明，孙杰，李剑峰. 基于刚度与应力演变机制的整体结构件加工变形预测理论建模[J]. 机械工程学报. 2017, 53(9): 201-208. EI收录号： 20173003971091

[2]黄晓明，孙杰，李剑锋.长梁整体结构件加工变形预测及校正分析. [J].中国工程机械学报,2017,15(3):210-215.

侯秋林

侯秋林, 孙杰, 皇攀凌,等. 基于机器视觉刀具几何参数检测算法与误差分析[J]. 山东大学学报(工学版), 2017, 47(4):77-82.

刘凯

Kai Liu, Jianfeng Li, Jie Sun, et al. Investigation on chip morphology and properties in drilling aluminum and titanium stack with double cone drill[J]. International Journal of Advanced Manufacturing Technology, 1433-3015(2017).DOI:10.1007/s00170-017-0988-4(SCI, IF=2.209) (online)

刘春

刘春, 孙杰, 刘凯, 等. 聚氨酯泡沫辅助加固钛合金薄壁件铣削性能研究[J]. 制造技术, 2017, 530(11):93-98.

Chun Liu, Jie Sun, Yanle Li, Jianfeng Li. Investigation on the Milling Performance of Titanium Alloy Thin-walled Part with Air Jet Assistance[J]. International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-017-1420-9 (SCI)